D. Light On/Off Button
•
J-335/J-345/J-355/J-365 Models: Turns waterfall, footwell light,
lighted cup holders and backlit pillows on in unison. Press once for
high intensity; press a second time for medium intensity; press a
third time for low intensity; press a fourth time to turn off. The dis-
played color is changed using the light mode button (E) below.
•
J-335/J-345/J-355/J-365 Models: Controls Spa Light. See section
9.3, page 22 for details.
E.
Light Mode Button (J-335/J-345/J-355/J-365 Models Only):
Selects one of 5 color modes for waterfall, footwell, cup holders,
and pillows lights. See page 22 for additional information.
F.
Jets 1 Button: Turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to
turn pump off.
G. Jets 2 Button (2-Pump Models Only): turns high-speed jets pump
#2 on and off. Press once to turn on; press a second time to turn
pump off.
H. Heat Indicator: Lit when heater is on.
Operation Details
•
Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default
setting is 100°F (38°C).
•
Light Operation: All lights run for 1 hour then shut off automatically.
•
Jets 1/Jets 2 Button Operation: Jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
Page 19