Mounting Instructions - Amped Wireless REB175P User Manual

REB175P USER'S GUIDE

MOUNTING INSTRUCTIONS

Magnetic Mounting
The mounting kit included with the Range Extender / Bridge provides a
convenient method to mount the Range Extender / Bridge on a wall or
ceiling. Once you have chosen the location for where you want to install
the Range Extender / Bridge, locate the Mounting Template. Use it to
mark the screw hole locations onto your wall.
Once the screw holes have been marked, locate the Magnetic Mounting
Kit and use the included screws to fasten the two magnetic plates to the
wall.
Once the plates are fastened, attach the Range Extender / Bridge to the
wall plates and check that the magnets are firmly holding the Range
Extender / Bridge to the wall.
Wall Mounting
In addition to the Magnetic Mounting Kit, the Range Extender / Bridge can
also be mounted using the standard wall mounting clips on the bottom of the device.
7