Amped Wireless REB175P User Manual page 128

REB175P
Many of the features in the Web Menu are greyed out and cannot be selected. For example, in Advanced
Features most features are not selectable.
a. Certain features such as Port Forwarding and DMZ are only available when the Range Extender / Bridge
is in Firewall Range Extender mode. Ensure that you are using the proper operational mode for the
feature you wish to enable.
I have configured MAC Address Filtering and/or RADIUS servers, but they do not work for my Extended
Network.
a. Each Wi-Fi Network (WLAN/SSID) must also have RADIUS servers or MAC Filters selected as an
Additional Authentication method in order for the feature to work. This can be done via the Web Menu
by accessing the Wi-Fi Settings tab and going to Security for either the 2.4GHz or 5.0GHz networks.
Select the specific SSID that you wish to configure and apply the MAC or RADIUS server setting in
Additional Authentication.
I have enabled Smart Handover, but it does not seem to be handing over the devices properly.
a. Set the RSSI threshold to a lower number (i.e. 0 to -50) This will allow the Range Extender / Bridge to
handover the device when the signal strength between the device and the Range Extender / Bridge is
still moderately strong.
USER'S GUIDE
127