Amped Wireless SB1000 Setup Manual

SETUP GUIDE
High Power 1000mW Wi-Fi Signal Booster
1

Assemble and Connect the Signal Booster to your Wireless Device

Detach the antenna from
A
your Certified Wireless Device
Wireless Router *

Product Description

Features

LED Descriptions
Wireless Data
Activity LED
Power LED

Placement

Placement
For optimal range, use the Signal Booster towards the center of your home For optimal range, use the Signal Booster towards the center of your home
in a high location. The Signal pattern for the Signal Booster is shown below: in a high location. The Signal pattern for the Signal Booster is shown below:
M

Mounting Instructions

ti I t

Magnetic Mounting:

The Signal Booster has a magnetic base and can be mounted on any magnetic
surface, such as a desktop computer case.
Wall Mounting:
Use the included screws to mount the Booster on the wall correctly:
Leave the screw 3-5 mm away from the wall so the Booster's mounting plate can
be mounted securely between the wall and the screw head. Use the provided
screws to ensure proper wall installation.
Mounting Template:
Screw Size
1/4in / 3mm ~ 3/8 in / 9mm
Screw Offset
1/8in / 3mm~3/8in / 5 mm
Wall
— R E A D
Attach the Signal
C
Booster to the antenna
connector of your Wi-Fi
device
* Works with certified devices with Reverse Jack SMA Antenna Connectors
SB1000 0
Signal Booster oste e r r r r
Wireless Signal Pattern
ti
~
F I R S T
Attach the included 7dBi
B
High Power Antenna to the Signal Booster
SMA (RJ-SMA) Antenna Connector
Power Adapter DC port
TOP VIEW
Wireless
Router
2.5 in
Place screws 2.5" apart
3.125 in
Get Help:
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
—
Plug in and power
D
on the Signal Booster
Signal Booster
RP-SMA Connector:
Connects to the antenna
connector of a certified
wireless device
SB1000