Dashboard: Wds Settings - Amped Wireless REB175P User Manual

REB175P USER'S GUIDE

Dashboard: WDS Settings

If the Range Extender / Bridge has been set to WDS-Bridge
operational mode, the WDS settings page will give you a
glance at the status of current WDS connections. The page
provides you with information for each frequency: 2.4GHz
and 5.0GHz depending on your WDS configurations. Each
section will display information for each WDS connection
such as their connection state and signal strength in addition
to identifying each connection by its MAC address. If
encryption is used for the connections, that is displayed as
well.
There are also shortcuts to access the configuration menu
your WDS settings in case you wish to make changes.
48