Clearing Paper Jams - Samsung SCX-4720F Service Manual

6.2 Clearing Paper Jams

Occasionally, paper can be jammed during a print job. Some of the causes include:
• The tray is loaded improperly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Paper was used that does not meet paper specifications.
• Paper that is outside of the supported size range was used.
If a paper jam occurs an error message appears in the LCD display. Find and remove the jammed paper.
If you don't see the paper, open the covers.
Do not use a tweezers, pincers or other metal tools when clearing a paper jam.
This could damage the internal mechanism causing print quality problems or possibly electrical shock.
ADF-Roller
ADF-Idle Roller
Sensor-Regi Sensor-Regi
Feed-Roller
Sensor-Scan Sensor-Scan
White-Sheet White-Sheet
Document Jam
(in the ADF area)
Fuser
EXIT
PR
Sensor
Paper Jam1
(in the fuser area or around the toner cartridge)
L S U
Fuser
CR
EXIT
PR
Sensor
Empty Sensor
MP Tray Jam
(in the manual feed area)
Samsung Electronics
Pickup-Roller
Doc-Paper(30Sheets)
Sensor-Doc Sensor-Doc
Exit-Roller
L S U
Toner Cartridge
CR
DR
OPC SR
PTL
MP Sensor
Feed
TR FR
Sensor
Empty Sensor
Toner Cartridge
DR
OPC SR
PTL
MP Sensor
Feed
TR FR
Sensor
Alignment & Adjustments
L S U
Fuser
CR
OPC
EXIT
PR
Sensor
TR
Empty Sensor
Paper Jam0
(in the paper feed area)
L S U
Fuser
CR
DR
OPC
EXIT
PR
Sensor
PTL
TR
Empty Sensor
Paper Jam2
(in the paper exit area)
Toner Cartridge
DR
SR
PTL
MP Sensor
Feed
Sensor FR
Toner Cartridge
SR
MP Sensor
Feed
Sensor FR
Service Manual
6-3