Alignment & Adjustments
6.2.2 JAM0 (In the Paper Feed Area)
1) Open and close the front cover.The jammed paper
automatically exits the machine.
If the paper does not exit,continue to Step 2.
2 Pull the paper tray open.
3) Remove the jammed paper by gently pulling it
straight out.
If there is any resistance and the paper does
not move when you pull or if you cannot see
the paper in this area, skip to the fuser area
around the toner cartridge.
Service Manual
6-6
4) Insert the paper tray into the machine until it snaps
into place.
5) Open and close the front cover to resume printing.
Samsung Electronics