5.19 Feed Ass'y
1. Before you remove the Feed Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover (LH, RH) (see page 5-3)
- Front Cover (see page 5-4)
- Scanner Ass'y (see page 5-5)
- Middle Cover (see page 5-14)
- Controller Shield Ass'y (see page 5-15)
- Drive Ass'y (see page 5-20)
2. Remove the 4 screws securing the Guide Paper Front
and remove it.
Guide Paper Front
3. Remove the screws on the right and left sides of the
guide paper to remove the guides and the spring as
shown below.
Screw
Spring
Guide Paper
Samsung Electronics
4. Remove the 3 screws securing the Feed Bracket and
remove it.
Feed Bracket
5. Remove the Feed Gear2.
Feed Gear2
Precautions
Service Manual
5-23