6. Unplug the one connector and remove 5 screws
securing the ADF Motor Ass'y. Then take out the ADF
Motor Ass'y.
ADF Motor Ass y
ADF Lower Ass y
Note. It is not necessary to disassemble the ADF unit in
order to change the ADF separator pad. Simply
open the ADF cover and remove the Pickup Ass'y
(step 4 page 5.10). Then, using a pair of tweezers
or a small flat-bladed screwdriver, release the clips
on each side of the ADF Separator Pad Ass'y.
Samsung Electronics
Precautions
Service Manual
5-11