Table of Contents
Advertisement
8
en | Installing a Recessed Mount
2.
3.
Figure 4.2 Mounting bracket
4.
5.
6.
F.01U.261.808 | 1.0 | 2011.10
Drill or cut a 7 in. hole with a tolerance of +/- 1/8 in.
(177.8 mm +/- 2.2 mm).
Optional: if installing the camera to a suspended ceiling
tile or any other surface where additional support is
required, the LTC 9349MK mounting kit (sold separately)
is recommended. See the instruction book supplied with
the mounting bracket for installation instructions.
Align holes of mounting plate (supplied with dome) with
mounting bracket and attach with screws. Ensure that
both the crescent shape of the mounting plate and the
crescent shape of the mounting bracket are aligned.
Ensure that the clamping plates are angled inward by
pushing up and into the two slots.
Insert mount through the hole and into the ceiling. Slide
clamps out and down so that the drywall is clamped in
between the clamps and the bracket flange, 41.7 mm
(1.64 in.) maximum ceiling thickness and 12.7 mm
(0.50 in.) minimum ceiling thickness).
Installation Manual
Mini PTZ Dome Accessories
Bosch Security Systems, Inc.
Advertisement
Table of Contents
