User Instructions - Hans Grohe Metro E 06697XX0 Installation Instructions / Warranty

Connect the hot and cold supplies
Connect the hot and cold supply hoses to the
supplies with standard 3/8" compression fittings
(included). Use two wrenches, as shown in the
diagram. Tighten the compression fittings wrench
tight.
Do not allow either hose to twist.
Twisting the supply hose may cause
it to loosen from the faucet, which
may cause water damage.

User instructions

The spout swivels a full 360
the spout further than 360
to the hose will result.
Push the handle to the right to turn the water on,
to the left to turn the water off. Swivel the handle
forward for cooler water, back for warmer water.
Press and hold the diverter to activate the spray
mode. Release the diverter to return to stream
mode.
If the flow of water decreases, remove and clean
the filter.
. Do not swivel
o
, or damage
o
filter
diverter
English
5