Connection; Connecting With A Phone; Disconnecting From A Phone; Unpairing - Casio 3459 Operation Manual

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X Hold down (C) for about three seconds
until e and [CNCT] flash on the display.
When a connection is established
between the watch and phone, e and
[CNCT] will stop flashing.
If connection fails for some reason, [NG]
●
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode.
Trying to connect
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running
on the phone. On the phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (C) button
for about three seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
G-SHOCK Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5
minutes, or 10 minutes.
Operation Guide 3459

Disconnecting from a Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
Y Tap the "G-SHOCK Connected" icon.
3.
Y Perform the operation shown on the
Connected
phone screen to unpair.
Note
If you are unable to re-pair the watch
●
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Hold down (A) for about two
seconds until [HT] flashes on the
display.
B X Press (C) twice.
This causes the seconds to flash.
C X Hold down (B) for about three
seconds. Release the button when
[Hold] disappears and [CLR] appears.
This deletes the pairing information
from the watch and returns to the
timekeeping display.
Preparing to delete
pairing information
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
After disconnection
After disconnection
Seconds
Deleting pairing
information

If you purchase another phone

C Pair the watch with a phone.
Note
If your previous phone is near the
●
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, use the
procedure below to delete the
previous pairing information from the
watch. Also, unregister the watch
from the phone you will no longer
connect with.
A X Hold down (A) for about two
seconds until [HT] flashes on the
display.
B X Press (C) twice.
This causes the seconds to flash.
Seconds
C X Hold down (B) for about three
seconds. Release the button when
[Hold] disappears and [CLR] appears.
This deletes the pairing information
from the watch and returns to the
timekeeping display.
Preparing to delete Deleting pairing
pairing information information
7