5-5
Out of Display Range / Measurement Range
5-5-1
Out of Display Range
1) When "E.o" (Exposure Over) appears on the display
If the measured value higher than the maximum display range, "E.o" (Exposure over) will
appear even though measured value is within the meter's measuring range. In this case,
make one of the following adjustments to display the measured value.
Operation
1.
Press UP Button to select a faster shutter speed setting.
2.
Set lower ISO by pressing DOWN Button while holding ISO
Button.
3.
If possible, lower the output power of light source, and take
another measurement.
2) When "E.u" (Exposure under) appears on the display
If the measured value is lower than the minimum display range, "E.u" (Exposure under)
will appear even though measured value is within the meter's measuring range. In this
case, make one of the following adjustments to display the measured value.
Operation
1.
Press DOWN Button to select a slower shutter speed setting.
2.
Set higher ISO by pressing UP Button while holding ISO Button.
29
5. Measurement
●