Select Measuring Mode - Sekonic FLASHMATE L-308X Operating Manual

4-4

Select Measuring Mode

The following Measuring modes in each Display
Press the MODE Button to select the Measuring
PHOTO Mode:
• Shutter Speed Priority Mode (Ambient mode)
• Aperture Priority Mode (Ambient mode）
• EV mode (Ambient mode)
• Cordless Flash Mode
(Shutter Speed Priority)
• Cord Flash Mode (Shutter Speed Priority)
HD_CINE Mode: (Ambient light only)
• Shutter Speed Priority Mode
• Frame Rate Setting Mode
• Simplified Illuminance Mode (Selectable in Custom setting)
CINE Mode: (Ambient light only)
• Frame Rate Priority Mode
• Shutter Angle Setting Mode
• Simplified Illuminance Mode (Selectable in Custom Setting)
NOTE
● Hold ISO Button and press MODE Button to return to the previous Measuring Mode.
● Ambient light refers to continuous light like natural light (sunlight), tungsten lamps or
fluorescent lamps.
● Flash light is a brief, intense burst of light made by electronic flash units or flash bulbs.
Mode
are available.
Mode
. ( ➡ P8)
12
4. Basic Operation
MODE Button
MODE
●