When you first connect the unit to the mains socket, the unit will be in STanDBY mode.
The LED indicator will not light up.
Press on the unit or the remote control to switch the unit to On mode. The LED
indicator will light up blue.
Press to switch the unit back to STanDBY mode. The LED indicator will not light up.
Disconnect the mains plug from the mains socket if you want to switch the unit off
When the unit volume is close to mute or is idle for approximately 15 minutes, it will
automatically switch to Standby.
Press MODE on the unit or the remote control to switch between aUX and OPTiCaL mode.
The LED indicator will light up blue if in aUX mode and red if in OPTiCaL mode.
AUX mode is the default mode every time the unit is switched on.
adjusting the Volume
Press VOL +/– on the unit or the remote control to adjust the volume.
If you wish to turn the sound off, press on the remote control. Press again to
resume normal listening.
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray aerosol at or near the unit.