Remote Control
1.
Button
Switches the unit between On and
STanDBY modes.
MODE Button
2.
Selects the input source.
GB
3.
Button
Mutes the unit or resumes the sound.
4.
VOL + Button
Increases the volume.
5.
VOL – Button
Decreases the volume.
Remove the Plastic Strip from the Remote Control
Remove the plastic strip from the battery if the battery is
being used for the first time. It is located at the bottom rear
of the remote control.
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1.
Slide and hold the battery release tab in the
direction of the arrow.
2.
Pull out the battery holder and remove the old
battery.
3.
Replace with a new battery.
4.
Insert the battery holder back into the remote
control.
10
1
2
3
4
5