General Operation
The LED indicator will not light up.
Press on the unit or the remote control to switch the unit to ON mode. The LED
•
indicator will light up blue.
•
Press to switch the unit back to STANDBY mode. The LED indicator will not light up.
•
completely.
When the unit volume is close to mute or is idle for approximately 15 minutes, it will
automatically switch to Standby.
Selecting Modes
Press MODE on the unit or the remote control to switch between AUX and OPTICAL
and BLUETOOTH mode.
The LED indicator will light up green if in AUX mode and red if in OPTICAL and blue
if in BLUETOOTH mode.
AUX mode is the default mode every time the unit is switched on.
Adjusting the Volume
Press VOL +/– on the unit or the remote control to adjust the volume.
•
•
resume normal listening.
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
•
Do not spray aerosol at or near the unit.
Attaching Self Adhesive Pads
•
Peel back the adhesive cover on the foot pad.
•
Align and attach the adhesive side of the pad to the foot pad cutaway section on
the bottom of the soundbar.
•
Press the pads rmly to ensure they are well secured.
16
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
STANDBY mode.
on the remote control. Press again to