Clarifier (Receiver Incremental Tuning) - Yaesu FT-891 Operating Manual

Clarifier (Receiver Incremental Tuning)

The [ CLAR ] key and MULTI knob are used to offset the receive frequency, the transmit
frequency, or both, from their settings on the VFO-A frequency. Four small numbers on
the Display show the current Clarifier offset. The Clarifier controls on the FT-891 are
designed to allow setting a preset offset (up to ±9.99 kHz) without actually re-tuning, and
then to activate it via the Clarifier [ CLAR ] key. This feature is ideal for following a drifting
station, or for setting the small frequency offsets sometimes utilized in DX "Split" work.
Here is the technique for utilizing the Clarifier:
1. Press the [ CLAR ] key. The programmed off-
set will be applied to the receive frequency.
2. Press the MULTI knob, then rotation of the
MULTI knob will allow you to modify your
initial offset on the fly. Offsets of up to ±9.99
kHz may be set using the Clarifier.
3. To cancel Clarifier operation, press the [ CLAR ] key.
Note: Turning the Clarifier off merely cancels the application of the programmed offset
from the receive and/or the transmit frequencies. To clear the Clarifier offset, and
reset it to "zero," press and hold the [ CLAR ] key.
FT-891 Operating Manual
Application for FCC / IC
FCC ID: K6620651X50 / IC: 511B-20651X50
Basic Operation
17