Rf Field Exposure - Yaesu FT-891 Operating Manual

Application for FCC / IC
FCC ID: K6620651X50 / IC: 511B-20651X50
Installation

RF FIELD EXPOSURE

This transceiver is capable of power output in excess of 100 Watts, so customers in the
United States may be required to demonstrate compliance with Federal Communica-
tions Commission (FCC) regulations concerning maximum permissible exposure to radio
frequency energy. Compliance is based on the actual power output used, feedline loss,
antenna type and height, and other factors which can only be evaluated as a system.
Information regarding these regulations may be available from your Dealer, your local
radio club, from the FCC directly (press releases and other information can be found on
the FCC's site on the World Wide Web at <http://www.fcc.gov>), or from the American
Radio Relay League, Inc. (225 Main St., Newington CT 06111 or <http://www.arrl.org>).
Although there is negligible radio frequency (RF) leakage from the FT-891 transceiver it-
self, its antenna system should be located as far away from humans and animals as prac-
ticable, so as to avoid the possibility of shock due to accidental contact with the antenna
or excessive long-term exposure to RF energy. During mobile operation, do not transmit if
someone is standing adjacent to your antenna, and use the lowest power possible.
9
FT-891 Operating Manual