Guild BTS180B Instruction Manual

Guild BTS180B Instruction Manual

800w 200mm table saw

Advertisement

GUILD
800W 200mm Table Saw
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild table saw
These instructions contain important information that will help you get the best from your Guild
table saw, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
BTS180B

Advertisement

Table of Contents
loading

Summary of Contents for Guild BTS180B

  • Page 1 Important - Please read these instructions fully before operating or maintaining your Guild table saw These instructions contain important information that will help you get the best from your Guild table saw, ensuring it remains safe to operate. If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989...
  • Page 2: Table Of Contents

    Contents Safety Information ����������������������������������������������������������������������������������������������������3 In The Box �����������������������������������������������������������������������������������������������������������������7 Accessories ��������������������������������������������������������������������������������������������������������������7 Assembly Instructions ����������������������������������������������������������������������������������������������8 Operating Instructions �������������������������������������������������������������������������������������������� 10 Maintenance ����������������������������������������������������������������������������������������������������������� 11 Technical Data �������������������������������������������������������������������������������������������������������� 13 Environmental Protection ��������������������������������������������������������������������������������������� 13 Guarantee ��������������������������������������������������������������������������������������������������������������� 14 Declaration of Conformity ��������������������������������������������������������������������������������������� 14 Plug Replacement (Uk & Ireland Only) ������������������������������������������������������������������� 15 Customer Helpline 0333 3201989...
  • Page 3: Safety Information

    Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the table saw. To reduce the risk of injury, Please read the instruction manual Wear eye protection Wear ear protection Wear dust mask...
  • Page 4 Safety Information Important - Please read these instructions fully before starting assembly "WARNING! When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions".
  • Page 5 Safety Information Important - Please read these instructions fully before starting assembly 13 - Do not overreach - Keep proper footing and balance at all times. 14 - Maintain tools with care - Keep cutting tools sharp and clean for better and safer performance. - Follow instruction for lubricating and changing accessories.
  • Page 6 Safety Information Important - Please read these instructions fully before starting assembly Table Saw Safety Warnings – Do not use saw blades which are damaged or deformed; – Replace table insert when worn; – Use only saw blades recommended by the manufacturer; which conform to EN 847-1. WARNING: When changing the saw blade beware that the width of the groove cut of the saw blades shall not be less than and the thickness of the body of the saw blade shall not be more than the thickness of the riving knife;...
  • Page 7: In The Box

    In The Box Parts Motor Saw table Scale for angle settings (SEE FIG C1) Parallel guide TCT blade Locking knob for angle adjustment Riving knife Parallel guide locking screw Screw for TCT blade guard On/Off switch Rubber pad TCT blade guard Table insert (SEE FIG G2) Stand 45°cutting guide (SEE FIG E)
  • Page 8: Assembly Instructions

    Assembly Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for cutting wood and similar material e.g. MDF and chipboard, plastic This product should not be used on other materials or those harmful to health. It is to be used for dry operation only without water or other cooling liquids.
  • Page 9 Assembly Instructions 1) STOP HEIGHT (SEE FIG B1 & B2) The parallel guide (10) supplied with the bench type circular saw has two different guide faces. For thick material you must use the parallel guide rail (b) as shown in Fig. B1, for thin material you must use the stop rail as shown in Fig.
  • Page 10: Operating Instructions

    Operating Instructions After each new adjustment it is advisable to carry out a trial cut in order to check the set dimensions. After switching on the saw, wait for the blade to reach its maximum speed of rotation before commencing with the cut. Secure long workpieces against falling off at the end of the cut (e.g.
  • Page 11: Maintenance

    Maintenance WARNING: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Remove the plug from the socket before carrying out any adjustment, servicing or maintenance� Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool.
  • Page 12 Maintenance 2� ADJUSTING THE RIVING KNIFE (SEE FIG G1, G2, G3) 1) Loosen the screw (k) for the TCT blade guard (14) with a spanner, and remove the TCT blade guard (14). (SEE FIG G1) 2) Remove the two screws (l) and take out the table insert (15). (SEE FIG G2) 3) Loosen the two socket-head screws (m).
  • Page 13: Technical Data

    Technical Data Technical Data Table Voltage 230 -240V~50Hz Power input S2 10min 800W No load speed 2,950/min Φ200mm Blade diameter Cutting depth 90 degree 45mm 45 degree 27mm Table bevel range 0-45° Table size 505x335mm Machine weight 10.78kg Protection class Noise Information A weighted sound pressure : 96.6dB(A)
  • Page 14: Guarantee

    Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 800W 200mm Table Saw model number BTS180B fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/ EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and...
  • Page 15: Plug Replacement (Uk & Ireland Only)

    Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue = Neutral Brown = Live Green/Yellow=Earth As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows.

Table of Contents