Subscribe to Our Youtube Channel
Related Manuals for Huck 2580
Summary of Contents for Huck 2580
- Page 1 NSTRUCTION ANUAL 2580 Series YDRAULIC NSTALLATION OOLS ® ® ® Makers of Huck , Marson , Recoil Brand Fasteners, Tools & Accessories November 30, 2015 HK961...
-
Page 2: Ec Declaration Of Conformity
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961... -
Page 3: Table Of Contents
......18 ONTROL SSEMBLY 2580 ........19 SSEMBLY RAWING A2580 . -
Page 4: Safety Instructions
Huck representative. movement. 11. Only genuine Huck parts shall be used for replacements or If the assembly power tool is fi xed to a suspension device, spares. Use of any other parts can result in tooling damage make sure that fi... - Page 5 2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 AFETY NSTRUCTIONS (continued) IV. REPETITIVE MOTION HAZARDS: Wear warm clothing when working in cold conditions and 1. When using assembly power tool, the operator can keep hands warm and dry.
-
Page 6: Description
Huck POWERIG ® Hydraulic Unit (models 913, 918, ® a wide range of Huck Blind Fasteners and HUCKBOLT 918-5, 940, and 956 or an equivalent hydraulic unit) with Fasteners. These lightweight and compact mini-tools maximum operating pressures of: are ideal for installing fasteners in limited-clearance •... -
Page 7: Specifications
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 PECIFICATIONS CONTINUED IGURE... -
Page 8: Assembly Drawing Main Components
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 SSEMBLY RAWING OMPONENTS IGURE... -
Page 9: Rinciple Of Peration
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 RINCIPLE OF PERATION When the hydraulic hoses and trigger control are When fastener installation is completed, the trigger is ® connected to the POWERIG Hydraulic Unit, an electric released. -
Page 10: Operating
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 PERATING NSTRUCTIONS WARNINGS: - Wear approved eye and hearing 4. Press and hold the trigger until the collar is swaged protection. and the pintail breaks. Release the trigger; the tool - Ensure adequate clearance for operator’s... -
Page 11: Aintenance
- Smear LUBRIPLATE ® 130-AA or SUPER-O-LUBE ® NOTE: Where a part number (P/N) is given, Huck on rings and mating parts to ease assembly and to sells that part. prevent nicking/pinching rings on rough/tight spots. SYSTEM INSPECTION/PREVENTIVE MAINTENANCE... -
Page 12: Disassembly
fi ttings. 5. Model 2580: Loosen the strain relief grommet. Loosen the set screw and carefully pry out the switch with a small screw driver. Loosen the two wires at rear of the switch and remove it from the cord. -
Page 13: Ssembly
Thread the hydraulic hoses into the handle, and to ensure it stays in place during piston installation. slide the shrouds over the fi ttings. 14. Model 2580: Assemble the electrical cord to the CAUTION: Lubricate the inside diameter of connector. Screw the strain relief grommet into the the Polyseal. -
Page 14: Subassembly Part Numbers And Notes
OTES Refer to the Assembly Drawings in this manual. NOTE: Numbers in parentheses are Huck part numbers. An optional 12 ft. Hose Kit (122854) is available. See Figure 11. Front Grand Assembly (123139) includes: Back-up Ring (501118), O-ring (500824), Wiper (505894), Front Wiper Housing (123138), Polyseal (506160), and Front Gland (123137). -
Page 15: Sectional View 2580 Series
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 2580 S ECTIONAL ERIES IGURE... -
Page 16: Control Cord & Hose Assembly 2580
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 & H 2580 ONTROL SSEMBLY IGURE... -
Page 17: Sectional View A2580
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 A2580 ECTIONAL IGURE... -
Page 18: Ontrol Ord Ose Ssembly
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 & H ONTROL SSEMBLY IGURE ...to Cylinder/Handle (see Figure 5) Hose Assembly (See table below for part numbers.) 503431 110439 Reducing Female Bushing Connector 505839 Cable Ties (See table below for quantities.) -
Page 19: Assembly Drawing 2580
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 2580 SSEMBLY RAWING IGURE... -
Page 20: Assembly Drawing A2580
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 A2580 SSEMBLY RAWING IGURE... -
Page 21: Assembly Drawing 2580-12
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 2580-12 SSEMBLY RAWING IGURE... -
Page 22: Assembly Drawing 2580-25
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 2580-25 SSEMBLY RAWING IGURE... -
Page 23: Assembly Drawing 2580-38
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 2580-38 SSEMBLY RAWING IGURE... -
Page 24: Optional Hose Kit
2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 PTIONAL IGURE... -
Page 25: Ir Rigger Ose Ssembly
OCATIONS The 2580 series tools are labeled with a Sticker (P/N 590424-7400) that contains safety and pressure settings information. This sticker must remain on the tool and be legible. If the sticker becomes damaged or worn, or if it has been removed from the tool, or when replacing Cylinder, this sticker must be ordered and placed in the location shown below. -
Page 26: Roubleshooting
4. Hydraulic couplers leak fl uid. b. Scored anvil in nose assembly. a. Damaged or worn O-rings in coupler body. 9. Shear collar on Huck Blind fastener not properly 5. Hydraulic fl uid overheats. installed. a. Hydraulic unit not operating properIy; see unit a. -
Page 27: Kits & Accessories
& CCESSORIES Huck has created product-specifi c Spare Parts Service Kits that contain various perishable parts. The types and quantities of spare parts that should be available vary with the application and tools in use. Have the appropriate kit accessible when using this tool and when performing maintenance on it. - Page 28 2580 Series Hydraulic Installation Tools ( Alcoa Fastening Systems & Rings HK961 ERVICE OTES...
- Page 29 fi xtures that are not in good action is necessary. condition or repair and suitable for their intended Huck shall not be liable for any loss or damage purpose. resulting from delays or non-fulfi llment of orders owing THERE ARE NO WARRANTIES WHICH to strikes, fi...
- Page 30 The Future of Tooling Technology, and Tools express, implied, or statutory; all warran es of Produc vity are service marks of Huck are contained only in Huck’s wri en quota ons, Interna onal. Huck provides technical assistance acknowledgments, and/or purchase orders. It For the Long Haul ™...
Need help?
Do you have a question about the 2580 and is the answer not in the manual?
Questions and answers