Connecting A Timecode Source - Roland VC-30HD Owner's Manual

Connecting a Timecode Source

You can input a timecode from a source device simultaneously with digital audio. Use an
XLR cable to connect the source device to the [TIMECODE] connector on the rear panel.
* The standard supported by the VC-30HD is SMPTE 12M (LTC).
fig.connect-TC-source.eps
At this time, use the [AUDIO IN] selector switch to select [AES/EBU TIMECODE].
fig.select-AES-EBU.ep
Connecting External Equipment
Audio
LTC
25