Baby Phone Call - Gigaset SL910H Manual

Baby phone call

Baby phone call
When the baby phone is switched on, the stored (internal or external) destination number is called as soon
as a defined noise level is exceeded in the vicinity of the handset.
A baby phone call to an external destination number is cancelled after approximately 90 seconds (= time
for connection to be set up + duration of the connection). The baby phone call to an internal number is can-
celled after approx. 3 minutes (depending on the base). During a baby phone call, the accept call and menu
keys of the baby phone call handset are locked and the loudspeaker is deactivated.
Incoming calls are signalled only via the display, the lighting is reduced to 50%. Vibration alarm, ring tones,
advisory tones and paging are switched off.
If you accept an incoming call, the baby phone call mode is suspended for the duration of the call, but the
function remains activated.
The baby phone call is not deactivated by switching the handset off and on again.
Caution
u Always check the function when switching on (noise sensitivity, connection to an external num-
ber). Please note that the baby phone call is only activated 20 seconds after being switched on.
u Place the handset in the charger cradle so that the front with the microphone is facing the baby and
the distance between the handset and the baby is no more than 1 to 2 metres.
u No answering machine may be activated at the destination number.
Changing the settings
¤
v
[ Ç Room Monitor]
¤
Menu key
Select the sensitivity (High or Low) and destination of the
babyphone call (Internal or External).
¤
Next to Number touch '
¤ or select the internal participant.
è
¤
Confirm with Touch [
Activating/deactivating the baby phone call
¤
Switch on: Menu key
the key on the right.
¤
Switch off: On the handset on which the baby phone call
is activated, touch the key on the left.
Cancelling the baby phone call
¤
During a baby phone call, touch
¤ Accepting the baby phone call
On the destination phone/handset of the alarm call, press c
the pick-up key or pick up the receiver.
Deactivating the baby phone call remotely
Prerequisites: The destination of the baby phone call is an
external number. The recipient's phone supports tone dialling (MFV). ¤
Accept the baby phone call and touch the
The call is ended. The baby phone call is deactivated and the handset is in idle mode.
34
¤
Touch [
¤
Enter the destination number
è
Save].
v
[ Ç Room Monitor]
¤
a
.
9 ;
L
N
¤
Edit]
Sensitivity
k
¤
Low
Touch
Forward alarm to
Internal
Number
(Not configured)
keys.
Room Monitor
Off
k
High
External
M
è
Save
de en fr it nl