Calibration - Turnigy 9XR User Manual

Calibration (5/5)

CALIBRATION
START CALIBRATION
[MENU] TO START
This screen allows you to calibrate the analog channels (A1..A7).
The calibration method goes like this:
1. Press [MENU] → (SetMid)
2. Set Sticks to center. (Including throttle and pots)
3. Press [MENU] → (SetSpan)
4. Move sticks and pots through full range.
5. Press [MENU] → (Done) – Values are saved here.
6. Press [MENU] (Back to top)
The values are calculated when you press [MENU].
They are saved when you press [MENU] to (Done).
5/5