Turnigy 9XR User Manual page 10

Statistics Screens
STAT 08:02 TOT
TME 08:02 00:00 TSW
STK 00:00 00:00 ST%
From the main screen pressing [UP LONG]/[DOWN LONG] will enter the statistics screen.
The first shows some available timers and traces the throttle stick as well.
The second shows general timing of the Tx. The value "tmain" shows how long the math takes. This
will increase as you add more mixers. It can be very large sometimes depending on eeprom writes.
The Stack value shows the unused space, in hexadecimal, between the end of used Ram memory
and the lowest point the stack has reached. You can reset the timers by pressing [MENU].
STAT2
tmr 1Lat max 5 us
tmr 1Lat min 5 us
tmr 1 Jitter 0 us
tmain 6,31 ms
Stack 0123 b
[MENU] to refresh