Paint - Ecler IC6CLASSI User Manual

NOTE: In most cases, the electro-acoustical response of a ceiling/wall speaker like the
IC6CLASSI will be better if it is installed in a ceiling or on a wall made of low-porosity materials
and without the rear cover. The response in the low frequency range will be especially affected,
since these types of ceilings act as baffles" or mechanical loudspeaker enclosures.
5. Test the operation by powering up the sound system.
6. Finally, install the grill on the speaker frame and turn it slightly so that the revolving fasteners of
the frame and the grille are fitted together. During assembly, hold the grate by the edges (not
the perforated, centre part) to avoid damaging it.

5. PAINT

IC6CLASSI is ready to be painted and thus can match any cosmetic criteria of the environment
in which it is installed.
Once the installation is complete, the front grill is the only visible part of the unit, simply paint it
to get the desired result. Paint it carefully, avoiding excess paint from clogging the small holes in its
central area.
5