Installing The Usb-1208Ls; What Comes With Your Usb-1208Ls Shipment; Hardware; Additional Documentation - Measurement Computing USB-1208LS User Manual

Usb-based analog and digital i/o module

Hide thumbs Also See for USB-1208LS:

Table of Contents

Installing the USB-1208LS

As you unpack your USB-1208LS, verify that the following components are included.

USB-1208LS

USB cable (2 meter length)

In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of

the software you received with your USB-1208LS and information regarding installation of that software.

Please read this booklet completely before installing any software or hardware.

As with any electronic device, you should take care while handling to avoid damage from static

electricity. Before removing the USB-1208LS from its packaging, ground yourself using a wrist strap or by

simply touching the computer chassis or other grounded object to eliminate any stored static charge.

If any components are missing or damaged, notify Measurement Computing Corporation immediately by

phone, fax, or e-mail:

Phone: 508-946-5100 and follow the instructions for reaching Tech Support.

Fax: 508-946-9500 to the attention of Tech Support

Email:

techsupport@mccdaq.com

2-1

Chapter 2

Table of Contents

Do you have a question about the USB-1208LS and is the answer not in the manual?