Nortel T7100 Manual page 7

External page
² ß Û
Make a page announcement through an external loudspeaker system.
Internal and external page
²
Make a page announcement through both your telephone speakers and an
external loudspeaker system. Zone 0 pages all zones.
² à ¡
Pause
Program in an external autodial sequence to insert a 1.5 second delay › .
For pulse dialing:
² ß á
Priority
Call
Interrupt a person who is on a call.
A person on another call can press
priority calls.
² ¡ Ü
Privacy
Change the privacy setting for an external line. If a line normally has privacy,
this permits another telephone that shares the line to join your call by
selecting the line while you are using it. If a line normally has privacy
disabled, this prevents another telephone that shares the line from joining
your call by selecting the line while you are using it. The privacy setting is re-
established once you end your call or when you enter the Privacy feature
code again.
² Û
Ring Again
Monitor a busy or unanswered telephone, or a busy line pool within your
system. Ring Again signals you to call back when the telephone or line pool
becomes available.
² ¥ ß
Ring type
Select a distinctive ring to help differentiate between your telephone and
others nearby.
1. Press
2. Enter the ring type number (
3. Press
² ¥ ¡ â
Ring
volume
Make your telephone ring so that you can adjust the volume. You can also
adjust the volume any time your telephone rings.
² ¥ á
Run/Stop
Store more than one autodial number or external carrier feature code on one
memory button by inserting a break point fl between numbers or codes. The
first press of the button dials the first number or code; the next press dials the
next number or code. You can program up to four numbers or codes
separated by break points.
ß Ü
and zone (0 to 6)
¥
also inserts a 1.5 second delay.
²
¥ ß
.
³
.
² ¡ Þ
(Do Not Disturb) to block
² £ Û
Cancel
Ú Ý
to ) .