Nortel T7316 User's Card

T7316 Telephone User Card
1-800-4 NORTEL
www.nortelnetworks.com
© 2002 Nortel Networks
P0935248 02
Printed in Canada
Your T7316 telephone
Telephone light
A
Flashes when a call rings at the telephone.
Lights up when Message Waiting Indication (MWI) is
supported by system software. Contact your System
Administrator or Coordinator for more information.
B Adjustable display
Shows the time and date, call and feature information.
C Display buttons
The label for display buttons appear in capital letters
on the bottom of the display. Display buttons change
with each feature you use.
Contrast level 2
Feature message
DOWN UP OK
Display button label
Display button
®
D Release button
Ends an active call.
E Dial pad
A
B
K
C
I
D
J
L
E
M
F
G H
N
Your T7316 telephone
√
F Volume control
Adjusts the handset, Handsfree, headset and ringer
volume.
©
G Mute button
Turns the microphone off or on when you are on a call.
¬
Headset button
H
Turns the headset mode on.
≤
Feature button
I
Starts or ends a feature.
≥
J Hold button
Places calls on hold.
Memory buttons
K
L Memory and line buttons
Ω
M Indicators
Appear next to active line and memory buttons.
N Number card
Write your extension number on this card.
Cord connections
1
Desk mount option
K
Route line cord through the stand.
L
2
Connect line cord to
wall jack.
Wall mount without a telephone stand
1
Press here to remove the stand.
Connect cords to the telephone,
refer to "Cord connections"
illustrations.
2
Connect line cord to
wall jack.
Place the telephone onto
the wall mount plate and
slide it down.
Wall mount with a telephone stand
1
Press here to remove the stand.
Headset option
key hole slots
Connect cord to
Use the key hole slots on the stand
headset.
to mark the location for the screws.
Tighten screws for a secure fit.
2
Connect cord to
handset.
Mount the stand as shown and
insert screw. Use the screw that
came with your telephone.
Connect cords to the telephone,
refer to "Cord connections"
illustrations.
3
Mount the telephone
onto the screws and
slide it down.
Connect line cord to
wall jack.
Telephone setup
Display contrast level
Adjust the contrast of your display.
1. Press ≤•‡.
2. Press UP or DOWN to view the levels.
3. Press OK to select a level.
Language choice
≤•fi‚⁄
Select Primary Language for the telephone display.
≤•fi‚¤
Select Alternate Language for the telephone display.
≤•fi‚‹
Select Alternate Language 2 for the telephone display.
≤•fi‚›
Select Alternate Language 3 for the telephone display.
Ring type
Select a different ring for your telephone.
1. Press ≤•fl.
2. Press ⁄ , ¤ , ‹ , › , or NEXT to hear the different
ring types.
3. Press OK to store the ring type.