After Treatment; Maintenance - Silk'n Motion H3220 Instructions For Use Manual

10. After treatment

When you have finished your treatment session:
EN
1. Turn the device off by giving the control button an extended press.
Remember the last energy level setting you used, because it will not
be restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.

11. Maintenance

It is important to clean your Silk'n Motion device after each treatment. To
clean the device:
L
Unplug the device.
L To clean the device including the treatment surface, wipe with
a clean, dry cloth. Never use acetone or other abrasive fluids,
because they will damage your device.
L
After cleaning, we recommend you store the device in its
original box.
E
Never immerse your Silk'n Motion or any of its parts in water.
16