3-16 Motor Assembly and Fan
1. Before you remove the motor assembly, you
should remove:
– Rear cover (see page 3-3)
– Left/Right side covers (see page 3-3, 3-4)
– Top assembly (see page 3-8)
2. Remove two screws securing the fan.
3. Remove five screws, unplug two connectors,
then remove the motor assembly.
Samsung Electronics
4. Remove a screw securing the fan and remove the
fan.
5. Remove three screws from the motor assembly.
6. Remove two screws from the motor bracket and
remove the motor.
Disassembly and Reassembly
3-13