3-8 OPE Assembly
1. Before you remove the cover, you should remove:
– Rear cover (see page 3-3)
– Left/Right side covers (see page 3-3, 3-4)
2. Open the OPE panel, then set the support-OPE to
the OPE panel.
3. From the right side of the main body, remove
two ground screws and unplug one OPE
harness.
Samsung Electronics
4. To unlatch the OPE ass'y, spread the both ends of
the OPE ass'y shown in circles in the figure
below, then remove the OPE ass'y.
Disassembly and Reassembly
Spread the both ends
of the OPE ass'y.
3-5