General Maintenance; Storage; Waste Disposal And Environ- Mental Protection; Replacement Parts/Accessories - Parkside PNTS 250 A1 Original Instructions Manual

GB IE
• Clean the equipment thoroughly after
each use.
• Clean the surface of the equipment
with a brush or cloth.

General maintenance

Before each use, check the equipment
for obvious defects such as loose, worn
or damaged components and check that
screws or other parts are sitting correctly.
In particular, check the grinding disc. Re-
place damaged parts.

Storage

• Store the appliance in a dry place well
out of reach of children.
• Grinding discs must be stored dry and
upright and are not to be stacked.

Replacement parts/accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone
(see "Service-Center" page 19). Please have the order number mentioned below ready.
Position Description
Instruction
manual
5 Dry grinding disc
1 Wet grinding disc
11,13 Set Water tank
22,26,27,28 Set Clamping flange, wet
22,23 Set Clampin flange, dry
2,3,17-21 Set Spark protection
6,7,14-16 Set Workpiece support
25 Set Grinding disc cover, outer
25a Set Grinding disc cover ,inner
16
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines are not to be place with
domestic waste.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out into pure materials
and recycling can be implemented. Ask
your Service Center about this. Defective
units returned to us will be disposed of for
free.
Order
number
91103553
30211041
30211042
30211043
30211044
30211045
30211046
30211047
30211048