Entering Programming Mode - Motorola CLS1110 User Manual

Entering Programming Mode

Press and hold Push to Talk and T for 3 seconds while turning the radio on. The
radio beeps and displays k , the channel number blinks, and the frequency
(indicated by l) and code (indicated by y) display alternately.
Note: If you press and release the Push to Talk button when programming CSL1410
models, you will return to the front of the Programming Mode.
Selecting a Channel (CLS1410 Only)
1. In programming mode, press S until the channel number blinks
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press [or ] to select the channel.
3. Press and hold Push to Talk to exit programming mode, or
press S to continue programming.
Configuring the Operating Frequency from a Pre-programmed Frequency List
1. In programming mode, press S until l displays and the
frequency number blinks.
2. Press [ or ] to select the frequency.
3. Press and hold Push to Talk to exit programming mode, or press
S to continue programming.
Note:
See page 44 for information on frequencies for communicating with other business
radios. If you are matching your
page 50.
Series radio to an existing Spirit GT radio, see
_
33