Series Programming Quick Reference
_
To enter programming mode, press and hold Push to Talk
and T for 3 seconds while turning the radio on. The radio
beeps and displays k, the channel number blinks, and the
frequency (indicated by l) and code (indicated by y)
display alternately.
Set the
Channel*
Set the
Frequency
Set the
Interference
Eliminator
Code
Set
Available
Channels*
* CLS1410 Only
Press [ or ].
Press S until l displays.
Press [ or ] to change the
frequency.
Press S until ydisplays.
Press [ or ] to change the
code.
Press S until = displays.
Press [ or ] to select number
of available channels.