Page 1
IMPORTANT - Please read the instructions carefully before assembling 43CM ROUND CHARCOAL KETTLE BBQ Assembly Instructions A ssembly Instructions PLEASE RETAIN THE INSTRUCTIONS FOR FUTURE USE.
Page 2
Safety and Care Advice the barbecue barbecue barbecue item. barbecue Wait for it to become cool. the barbecue barbecue barbecue winds. Only use Burning charcoal inside can cause harm which mainly results in serious injury How to use your barbecue •...
Page 3
PARTS LIST Please check parts against the list below before assembling your Barbecue Grill. Take a few moments to familiarise yourself with the contents. Check that all holes are clear of paint before assembly. 1 PC (A) ROUND BAKELITE HANDLE 2 PCS (B) SQUARE BAKELITE HANDLE 1 PC...
Page 4
1 PC (N) AIR VENT (FOR LID) (O) ASH VENT 1 PC (FOR FIRE BOWL) 2 PCS (P) M 4 X 20 BOLT 4 PCS (Q) M6 X 30 BOLT 2 PCS (R) M 4 X 10 BOLT 2 PCS (S) PLASTIC WASHER (T) WHEEL NUT 2 PCS...
ASSEMBLY All sharp edges have been carefully removed during manufacturing process, but please be careful when handling all components to avoid accident to happen. WARNING Tools required: Either a Philips crosshead or flat bladed screwdriver and either an adjustable spanner or a pair of pliers. STEP 1 - LID ASSEMBLY &...
STEP 4 - ATTACHING WIRE SHELF Place the fire bowl upside down on the floor so that the four legs point upwards and make sure that the short legs are closest to you.Take the wire shelf (M) and position it so the threaded bar is closest to your body and the two kinks at the other end of the shelf point upwards.
Page 7
STEP 7 - ASSEMBLY OF AIR VENT The air vent with handle (O) should be attached to the underside of the fire bowl.Use bolt (R) and wing nut (U) to secure in place. STEP 8 - PLACING OF CHARCOAL GRILL, COOKING GRILL &...
Need help?
Do you have a question about the 0423 and is the answer not in the manual?
Questions and answers