Advertisement
Do not expose the turntable to direct sun, dust, moisture or heat.
Keep the turntable in a place with good ventilation.
The interference may happen when a radio is placed too close to the turntable and both
radio and turntable are playing.
CONNECTIONS
Connect the AC power plug to a proper outlet.
HOW TO OPERATE
Place a record on the turntable mat.
Depress the 33 or 45 speed select button to choose the desired speed.
Turn the power switch to the ON position, where the strobe illuminator will light up.
Remove the stylus protector if your cartridge has one attached.
Release the arm clamp.
Push the start / stop button and then the turntable will begin rotating.
Set the cueing lever to the up position.
Position the tone arm over the desired position on the record and push down the cueing
lever. Then the tone arm will slowly lower onto the record and play will start.
When play is over, raise the tone arm, move it to the arm rest and lock it with the arm
clamp.
How to suspend play
Setting the cueing lever to the up position will lift the tone arm and then the play stops.
How to use manual cueing
The cueing lever is used when you want to momentarily interrupt the tone arm. Move the
lever gently to the UP position to interrupt the playing and to the
resume playing.
Keep the cueing lever in the down position when you are not using it.
Target Light ( Optional )
This unit is provided with the fixed target light for illuminating the stylus tip during play.
Remote control of Start / Stop ( Optional )
It allows the function of start / stop to be remote-controlled by a separate switch such as a
fader start.
* Note: If starting / stopping of the turntable is operated by both methods of pressing the
button on the unit and remote control, malfunctions may happen.
PAGE 5
DOWN position to
Advertisement
