Dell EMC XC6420 Series Solution Manual page 18

• Connect the keyboard or monitor or mouse device to the ports on the XC6420 appliance.
• Connect to the iDRAC GUI.
NOTE: For more information about configuring and accessing the iDRAC GUI, see the
Dell.com/idracmanuals.
4 Press F11 to restart the appliance and open BIOS boot manager.
5 To mount Dell Nautilus ISO or the USB key to the appliance, select EFI Boot Manager.
6 From the EFI boot list, select Virtual CD or USB drive.
7 Click Update Firmware.
Dell Nautilus updates all hard drives and SSD firmware for all hard drives and SSDs connected to the appliance.
18 Updating firmware
iDRAC Quick Start Guide at