Specifications; High Altitude Operation; Installation Requirements - NTI Trinity Ti 100 Installation And Operation Instructions Manual

Table of Contents

Advertisement

1.0 SPECIFICATIONS

Description
Input (BTUx1000)
Input Capacity - Max. / Min.
Output (BTUx1000)
Output Capacity - Max./ Min.
Steady State Efficiency
AFUE Efficiency
Venting material
Max. Vent lengths Natural Gas
Max. Vent lengths Propane
Weight
Dimensions L-W-D (Inches)
Clearance to Combustibles

1.1 High Altitude Operation

The Trinity boiler is designed to operate to capacity in
installations with 2000 feet of elevation or less. As
elevations higher than 2000 feet have less dense air, the unit
is not capable of providing its specified capacity. (See
Chart).
In Canada:
De-rate by 5% for altitudes between 2000 and 4500 feet.
For altitudes above 4500 feet consult with local authorities.
In USA:
De-rate by 4% for every 1000 feet over 2000 feet.
CAUTION At elevations greater than 2000 feet, the
combustion of the Trinity must be checked with a calibrated
combustion tester to ensure safe and reliable operation.
Consult Section 5.20 for instructions on adjusting the input to
provide proper operation. It is the Installers responsibility to
check the combustion, and to adjust the combustion in
accordance to Section 5.2

2.0 INSTALLATION REQUIREMENTS

Important: Carbon Monoxide Detectors
The installation of your NY Thermal Trinity gas boiler must
conform to the requirements of your local authority, and the National Fuel Gas Code ANSI Z223.1 and or CAN/CGA B149 Installation
Codes. Where required by the Authority, the installation must conform to the standard for "Controls and Safety Devices for Automatically
Fired Boilers ANSI/ASME CSD-1.
The Trinity boiler is set to operate with Natural Gas; LP Conversion Kit Part No. 82650-1 for Ti100's, Ti150's and
Ti200's, or LP Conversion Kit Part No. 83017-1 for Ti400's is included with each boiler and must be installed before
operating with Propane.
Liquefied Petroleum (LP) propane gas is heavier than air; it is imperative that your boiler is not installed in a pit or
similar location that will permit heavier than air gas to collect. Local Codes may require appliances fueled with LP gas
be provided with an approved means, of removing unburned gases from the room. Check your local codes for this
requirement.
Ti 100
Natural =100 / 15
Propane= 100 / 15
Natural =92.7 / 13.9
Propane = 92.7/ 13.9
95%
3" @ 105' Equivalent
80 lbs.
22.5x15.25x14
ATTENTION: LIQUEFIED PETROLEUM (LP) PROPANE
Ti 150
Natural =150 / 25
Natural = 200 / 25
Propane= 145 / 25
Propane= 194 / 25
Natural =139 / 23.2
Natural = 185 / 23.2
Propane = 134 / 23.2
Propane = 180 / 23.2
95%
95.1%
CPVC, PVC (See Section 3.1)
3" @ 105' Equivalent
3" @ 50' Equivalent
80 lbs.
22.5x15.25x17.25
22.5x15.25x14
0"
400
300
200
100
0
0-
3000
4000
2000
Ti150
Ti200
THIS BOILER MUST HAVE WATER
FLOWING THROUGH IT WHENEVER
THE BURNER IS ON. FAILURE TO DO
THIS WILL DAMAGE THE UNIT AND
VOID THE WARRANTY.
Ti 200
Ti 400
Natural = 399 / 75
Propane= 399 / 75
Natural = 370 / 69.5
Propane = 370 / 69.5
94%
4" @ 30' Equivalent
6" @ 65' Equivalent
110 lbs.
205 lbs.
23.5x21x36
5000
6000
7000
8000
Elevation (ft)
Ti400
Warning
94%
9000 10000
Ti100
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trinity ti 150Trinity ti 200Trinity ti 400

Table of Contents