Page 1
MICRO 1001 MICRO SYSTEM CD FM/MW RADIO INSTRUCTION MANUAL Before operating this unit, please read this owners manual carefully. Goodmans product information helpline: 0870 873 0080 HELPLINE PHONE NUMBER 0870 873 0080 HELPLINE PHONE NUMBER 0870 873 0080...
INTRODUCTION IMPORTANT NOTES This instruction manual is important to you. Please read it. In a short time it shows exactly Your hearing is very important to you and to us so please take care when operating this how to connect, operate, and adjust this unit for best performance. equipment.
CAUTION IMPORTANT SAFEGUARDS CLASS 1 LASER PRODUCT PRE FITTED MAINS PLUGS Use of contents or adjustments of performance of procedures other than those specified For your convenience a mains plug has been fitted to this appliance. For your safety please Herein may result in hazardous radiation exposure.
18. AC POWER CORD LOCATION OF CONTROLS 19. FM AERIAL 9. STOP/BAND Key • In the CD mode: to stop the 20. POWER SWITCH compact disc or clear program. • In the Radio mode: to select 21. AUX INPUT SOCKET the receiving band.
Page 5
CONNECTION REMOTE CONTROL DISPLAY • Do not switch the power to the unit on until all connections are made. • Do not place the FM aerial lead (B) on a metal desk or near a TV or personal computer. • Unravel and position the FM aerial lead away from the power and speaker cords as these could generate noise.
SETTING THE CLOCK TO REMOVE THE SPEAKER CORD SWITCHING THE UNIT ON SPEAKER GRILLES 1. Press DISPLAY to change to CONNECTION AND OFF Clock display. 2. Press and hold MEMORY/CLK 1. Insert your fingers at the top Press the power button to turn the unit on. and bottom of the grille and pull ADJ, the first second digit of "24H"...
COMPACT DISCS track number, press MEMORY/ • Use a blower (available from camera 2. To stop play, press STOP CLK ADJ to store it in the stores) to blow dust off the lens. 1. Always use compact discs bearing the 3.
INTRO PLAY(Remote control TUNER OPERATION For 'RANDOM' & 'MEMORY' 7. Upto 10 FM & 10 MW stations can be only) 1. Track elapsed time stored. Press INTRO during STOP mode 2. Clock time TUNING the first 10 seconds of each track 3.
TIMER OPERATION to store the start time. SLEEP Before setting the timer, make sure 1. Press SLEEP, on the Remote 'SLEEP' appears in the display. WAKE TO CD 2. Press and hold the SLEEP Button to adjust the sleep time in the order of the clock is correctly set.
TECHNICAL SPECIFICATIONS TROUBLESHOOTING GUIDE Please make these simple checks before calling our helpline. These tips can save you time Power Supply : AC 230V, 50Hz and money. Output Power (Per Channel) : 5 watts RMS into 4 ohm NO POWER •...