Welcome Your CD Boombox 2.1 In The Box 2.4 Rear view 2.2 Front View 2.5 Control panel 2.3 Top View Quick Setup 3.4 Bass Enhancement 3.1 Power On/Off and Function Selection 3.2 Standby & Auto Standby 3.5 Fitting Batteries 3.6 Connecting Earphones 3.3 Adjusting the Volume Operation CD Operation...
Welcome Thank you for choosing this Goodmans product. We’ve been making electronics for the British people for 70 years. Each of our projects has been carefully designed to be great at what it does and this one is no exception. We hope you enjoy your new CD Boombox.
RADIO TUNING control. Rotate to scan up or down the selected band frequencies. AUX INPUT socket. Connect ANT. external audio sources with a 3.5mm audio cable. Rear View AC mains input socket. Connect the mains cable to this socket. GPS04BLK...
Press to skip to next CD track(s). Press and hold to fast forward CD tracks. REP button. Press repeatedly to toggle the repeat functions. LCD DISPLAY. Displays all current information releative to the mode selected. BLUETOOTH LED. Indicates the status of a bluetooth connection. GPS04BLK...
3. When in CD, Bluetooth or AUX mode, once audio playback has ceased and the unit has stood idle for approximately 15 minutes, it will switch into a ‘power-down’ power saving mode. 4. To wake the unit up, press the STANDBY button (I). GPS04BLK...
If you are not going to use the CD Boombox for an extended period, please remove the batteries to avoid damage. Caution: Danger of explosion if battery is incorrectly inserted. Replace only with the same or equivalent type. GPS04BLK...
• Excessive sound pressure from earphones and headphones can cause hearing loss. • To avoid damaging your ears, adjust the volume to the lowest safe level before playing, and turn up to the desired level when playback has started. GPS04BLK...
To skip back to a specific track, press this button several times. 3. Hold the button (U) during playback to fast forward the current track. 4. Hold the button (O) during playback to fast rewind the current track. GPS04BLK...
This indicates that all the tracks of the current disc will repeat until the button (R) is pressed. 3. To turn off the REPEAT function press the REP. button (V) until the repeat icons disapear or press the button (R). GPS04BLK...
The volume output is affected by the volume level on the source EG: MP3 player so make sure that is set to about 70-80% ( not too loud to avoid distortion ). 3. Adjust the VOLUME control (E) on the unit to the required listening level. GPS04BLK...
If you turn off either device before pairing is complete the process will need to be repeated when powered on again. If you do not see ‘GPS04BLK’ press & hold the PAIR/ button (S) to re-initiate pairing mode. 4. Once paired the blue LED will stop flashing & the paired audio indicator melody will be heard.
CD boombox to a different location. No sound from the Bluetooth input Check the external device is paired correctly. The external audio source volume is too low, increase the volume level. GPS04BLK...
Frequency Range AM: 522-1620KHz Supported Disc Types CD-DA.CD-R/CD-RW Max Power Consumption AC 46W Dimensions 160mm (H) x 385mm (W) x 250mm (D) Customer Support Our customer service team is available for technical or guarantee support. Visit www.goodmans.co.uk/support QSG-JUNE14-GPS04BLK www.goodmans.co.uk GPS04BLK...