Removing Seat Pad For Cleaning - Safety 1st Guide 65 Instructions Manual

Convertible car seat
Hide thumbs Also See for Guide 65:
Table of Contents

Advertisement

Available languages

Available languages

4.
Insert Metal Retainer
Through Shell and Pad
Rotate buckle strap's metal
retainer, then insert retainer up
through the shell and pad.
5.
Remove Buckle from Child
Restraint
From the front, pull buckle strap
free from shell and pad.
C-8 Removing Seat Pad for Cleaning
You must remove the harness system to remove the
pad from the shell. See section C-7.
1.
Remove Headrest Pad
Remove headrest pad by pulling
the pad from the top of the
headrest down.
2.
Remove Lower Harness
Guides from Bottom of Seat
From the back, locate the lower
Lower Harness Guides
harness guides (A).
A
25
a.
Place the screw driver's tip
between shell and lower
harness guide, then twist the
screw driver while pulling
the harness guide from the
front. Repeat for other side.
Remove Elastic Straps
3.
(on select models)
From the bottom of shell,
release the elastic straps.
The positions of the
NOTE:
elastic straps may vary by
model.
4.
Undo Fastening Strip Behind
Headrest (on select models)
Lower headrest to lowest
position and undo the fastening
strip behind the headrest.
26
continued on next page.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrs 65Mightyfit 65

Table of Contents