Safety Information; Electrical Safety; Operation Safety - JHCTech FEBC-3150 User Manual

Safety Information

Read the following precautions before setting up a JHCTECH Product.

Electrical safety

● To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
● When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all
power cables from the existing system before you add a device.
● Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
● Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
● Make sure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
● If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.

Operation safety

● Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
● Before using the product, make sure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately.
● To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
● Avoid dust, humidity, and temperature extremes. Do not place the product in any area where
it may become wet.
● Place the product on a stable surface.
● If you encounter technical problems with the product, contact a qualified service technician
or your retailer.
IV
User's Manual