Table of Contents
Advertisement
b. After fixing hard disk, load the hard drive along the guild slot as shown in figure.
Figure 4.5
Figure 4.7
4.2.2 Memory Installation
a. Demount mounting bracket and bottom cover with Screwdriver as shown in figture.
Figure 4.8
b. Insert a memory chip at a 30 degree angle into the main board memory slot, as shown in
Figure
Figure 4.10
4.2.3 MSATA& MINIPCIE Installation
1）MSATA Installation
Fix a MSATA on the main board as shown in figure.
Notice:
After loading the hard disk, press and
twist the screw to fix the mounting
bracket.
Notice:
Demount the
cover
21
User's Manual
Figure 4.6
Figure 4.9
Notice:
Insert it at a 30 degree
angle
Figure 4.11
Notice:
Slowly loading the hard
drive along the guild slot.
If
get
stuck,pls. dismount it
to analyse . In order to
,pls. don't
avoid damage
force to install
Advertisement
Table of Contents
