Dialing A Stored Number; Chain Dialing From Memory - RCA 25413 User Manual

Telephone Operation
Reviewing, Changing or Deleting Stored
Names/Numbers
To Review: Press DIR/3on the handset, then press the
3or4 button to scroll through the stored numbers. Or
press the memory location number.
To Change: While viewing the record, press the SELECT/
SAVE button. Follow the steps under Storing a Name and
Number in Memory.
To Delete: Press DIR/3on the handset, then press the
3or4 button to scroll to a desired memory.
1. Press the DELETE button. DELETE? is displayed.
2. Press DELETE again to confirm.

Dialing a Stored Number

Make sure the phone is ON (in TALK mode).
1. Press the DIR/3button.
2. Press the desired memory location button (01-40) or
use the 3or4button to scroll to the desired telephone
number.
3. Press SELECT/SAVE to dial the displayed number.
-Or-
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR/3 button.
3. Press the desired memory location button (01-40), or
use the 3or4button to scroll to the desired telephone
number.
4. Press the TALK button. The telephone number dials
automatically.

Chain Dialing from Memory

Use this feature to make calls that require a sequence of
numbers, such as a frequently used long distance card
number. The following example shows how you can store
each part of the long dialing sequence and use chain
dialing to make a call through a long distance service
provider:
The Number For
Long Distance Access Number
Authorization Code
Frequently called long distance number
Make sure the phone is ON.
1. Press DIR/3 button and then press 0 followed by 7.
1
Memory Location
7
8
9