Table of Contents
Advertisement
Ensure that the device is stably mounted (especially when it
is mounted on the wall or ceiling). Use the safety rope to
prevent the device from falloff when mounting the camera.
To keep the housing clean, do not remove the transparent
protective film in the outer layer of the housing during
mounting. After confirming that the mounting is complete,
remove the transparent protective film before the device is
started.
It is common that static electricity exists on the housing. To
avoid dust absorption caused by static electricity, it is
recommended that you wipe the surface of the housing with
ESD gloves after removing the transparent protective film.
4
Installation
Mounting the SD Card (Optional)
The SD card is located inside the device. To mount the SD
card, you need to remove the housing. Hot plugging is not
recommended after you insert the SD card.
7
Advertisement
Table of Contents
