Advertisement

somfy.com
Dexxo Pro 800 - 1000 RTS
Manuel d'installation
FR
Gebrauchsanweisung
DE
Installation manual
EN
Instrukcja montażu
PL
Manuale d'installazione
IT
Installatiegids
NL
5048550F

Advertisement

Table of Contents
loading

Summary of Contents for SOMFY Dexxo Pro 800 - 1000 RTS

  • Page 1 Dexxo Pro 800 - 1000 RTS Manuel d’installation Gebrauchsanweisung Installation manual Instrukcja montażu Manuale d’installazione Installatiegids 5048550F...
  • Page 2: Table Of Contents

    CONTENTS GENERAL PRESENTATION �������������������������������������������������� 2 SAFETY INSTRUCTIONS ���������������������������������������������������� 2 Caution Safety instructions PRODUCT DESCRIPTION ���������������������������������������������������� 2 Product components Area of application POINTS TO CHECK PRIOR TO INSTALLATION ���������������������������������� 3 Preliminary checks Safety instructions INSTALLATION ������������������������������������������������������������� 3 Installation height Detailed description of installation steps PROGRAMMING �����������������������������������������������������������...
  • Page 3: General Presentation

    Somfy hereby declares that the device is compliant with the essential demands and other relevant requirements of directive 1999/5/CE. A declaration of compliance is available from the web site at www.somfy.com/ce (Dexxo Pro). This product is suitable for use in the European Union and in Switzerland.
  • Page 4: Points To Check Prior To Installation

    Door dimensions (Fig. 3) For maximum door heights, the motor travel can be optimised: • By installing the motor head at a 90° angle (Fig. 7- • By fixing the lintel bracket to the ceiling, behind the lintel itself by up to 200 mm (Fig. 5- •...
  • Page 5 Fitting the rail onto the motor head (Fig. 7) Fitting the complete assembly onto the garage ceiling (Fig. 8 to 10) Fitting to the lintel bracket (Fig. 8) Ceiling mounting • Flush with the ceiling: mount the system directly onto the ceiling using the rail (Fig. 9). It is possible to add mounting points at the motor head level (Fig.
  • Page 6: Programming

    PROGRAMMING Programming button description . Press for 2 s: memorise remote controls . Press for 7 s: delete remote controls . Press for 0.5 s: call up and exit the setup menu . Press for 2 s: start learning . Press for 7 s: clear learning and settings .
  • Page 7: Connecting Peripherals

    CONNECTING PERIPHERALS Description of the various peripherals Fig. 21 Description Description Pedestrian door safety kit Orange light Remote lighting Photoelectric cells Code keypad Reflex type cells Keyswitch Sensor bar Aerial Siren Battery Electrical connections for the various peripherals Fig. 21 to 30 Cut the electric power supply to the motor before performing any work on peripherals.
  • Page 8: Setup

    SETUP General setup diagram Fig. 31 Meanings of the various parameters Code Description Values Comments Total operating mode 0: sequential Each press on the remote control causes the motor to move (initial position: door closed) as per the following cycle: open, stop, close, stop, open… 1: sequential + timed close In sequential mode with automatic timed close: - the door is closed automatically after the timed delay...
  • Page 9 Code Description Values Comments Maintenance required Once the motor reaches the programmed number of cycles, the integrated 0: no indication indicator 1: 100 cycles light flashes each time the door moves to signal that maintenance is required. To stop the integrated light flashing, either the current value must be confirmed 99: 9900 cycles or modified, or the maintenance indicator must be deactivated.
  • Page 10: Clearing Remote Controls And All Settings

    Clearing remote controls Fig. 38 Press the “PROG” button until the light blinks (7 s). This clears all of the remote controls memorised. Resetting all settings Fig. 39 Press the “SET” button until the light goes out (7 s). This clears all previously stored settings and returns them to their default values. LOCKING PROGRAMMING (Fig.
  • Page 11: Error And Failure Codes Displayed

    Perform a learning cycle. If the fault persists, contact Somfy Technical Support. Detection of forced entry Displayed when an action occurs from Press a button on the memorised remote control to stop the outside the garage (read by reinjection siren.
  • Page 12: Technical Specifications

    Memorized end limit position at closing Electrical insulation Class 2: double insulation Built in lighting 24 V / 21 W ; BA15s socket Somfy radio frequency RTS 433.42 MHz Number of channels that can be memorised CONNECTIONS Safety input Type...
  • Page 13 Listes des filiales / Somfy weltweit / Lists of subsidiaries Lista oddziałów / Elenco delle filiali / Lijst van filialen Argentina : Somfy Argentina Indonesia : Somfy IndonesiaEra Romania : Somfy SRL +55 11 (0) 4737-37000 +62 (0) 21 719 3620...

This manual is also suitable for:

Dexxo pro 800 rtsDexxo pro 1000 rts

Table of Contents