The following table lists the cabling requirements for the switch.
Table 5. DB610S FC SAN Switch cabling requirements
Transceiver
Standard
32 Gb Fibre Channel
32 Gb FC SWL SFP+
FC-PI-6
(01KN789, 01KN793)
32 Gb FC LWL SFP+
FC-PI-6
(01KN795, 01KN799)
16 Gb Fibre Channel
16 Gb FC SWL SFP+
FC-PI-5
(88Y6393)
16 Gb FC LWL SFP+
FC-PI-5
(00MY768)
16 Gb FC ELWL
FC-PI-5
SFP+ (00MY770)
Management ports
10/100/1000 Mb
1000BASE-T Up to 25 m with UTP cables supplied by Lenovo (see Table 4).
Ethernet port
Serial port
RS-232
Lenovo ThinkSystem DB610S 32Gb FC SAN Switch
Cable
Up to 30 m with fiber optic cables supplied by Lenovo (see
Table 4).
850 nm 50 µ multi-mode fiber optic cable:
32GFC: Up to 100 m (OM4) or up to 70 m (OM3)
16GFC: Up to 125 m (OM4) or up to 100 m (OM3)
8GFC: Up to 190 m (OM4) or up to 150 m (OM3)
1310 nm 9 µ single-mode fiber optic cable:
32GFC, 16GFC, 8GFC: Up to 10 km
Up to 30 m with fiber optic cables supplied by Lenovo (see
Table 4).
850 nm 50 µ multi-mode fiber optic cable:
16GFC: Up to 125 m (OM4) or up to 100 m (OM3)
8GFC: Up to 190 m (OM4) or up to 150 m (OM3)
4GFC: Up to 400 m (OM4) or up to 380 m (OM3)
1310 nm 9 µ single-mode fiber optic cable:
16GFC, 8GFC: Up to 10 km
4GFC: Up to 30 km
1310 nm 9 µ single-mode fiber optic cable:
16GFC: Up to 25 km
UTP Category 5, 5E, and 6 up to 100 meters
DB-9/RJ-45-to-RJ-45 console cable (comes with the switch)
Connector
LC
LC
LC
LC
LC
RJ-45
RJ-45
7