Check The Opc System; Check The Pto Control System - Kubota GZD21-2 HD Assembly Manual

C Check the OPC system
1. Start and run the machine following all safety instructions in the operator's manuals.

2. Check the OPC system.

Check the following tests before operating the machine.
If the machine does not pass one of the following tests, do not operate the machine.
Test 1 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever to "DISENGAGE" (OFF) position.
4. Grasp the motion control levers and move them inward from "NEUTRAL LOCK" position to
"NEUTRAL" position and then release the levers.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off.
Test 2 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever to "ENGAGE" (ON) position.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off.
C Check the PTO control system
1. Start and run the machine following all safety instructions in the operator's manuals.

2. Check the PTO control system.

Check the following tests before operating the machine.
Sit on operator's seat for all tests.
If the machine does not pass one of the following tests, do not operate the machine.
Test 1 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Lift the container (for HD), or emptying the container (for LD).
3. Shift the PTO lever to "ENGAGE" (ON) position.
4. The engine must shut off.
(1) Brake pedal
(2) Parking brake lock pedal
(3) Motion control lever
Inspection item
Inspection item
(4) PTO lever
(5) Key switch
17
Results
Results