Installing The Upper Rops Pipe; Adjustment Of Foldable Rops; Installing The Front Guard - Kubota GZD21-2 HD Assembly Manual

12
BInstalling the Upper ROPS Pipe
Use 2 set pin assies, locking nuts and bolts to install PIPE,
ROPS UPPER (1) to PIPE, ROPS UNDER.
Tightening torque: 50.0 to 60.0 N-m
5.1 to 6.1 kgf-m
(1) PIPE, ROPS UPPER
(2) Set pin
(3) BOLT (M16)
(4) NUT (M16)
BAdjustment of Foldable ROPS
A Adjust free fall of the ROPS upper frame regularly.
A If you feel less friction when folding the ROPS, tighten
the nut (1) until you feel the right friction in the
movement and then replace the cotter pin.
(1) Nut
BInstalling the Front Guard
1. Remove 2 existing bolts. (These bolts will not be
used.)
(1) Existing bolt (M10)
2. Use 2 bolts, 2 nuts and 2 washers to install GUARD
(FRONT) to the weight bracket as shown in the figure
below.
(1) GUARD (FRONT)
(2) Bolt (M10 x 100)
(3) Nut (M10)
(4) WASHER, SPRING